Showing posts with label Heart Rate. Show all posts
Showing posts with label Heart Rate. Show all posts

Monday, August 19, 2013

Zone 2 Training Works...But Not Today

Over the last two years or so, the topic of Zone 2 ("Z2") training has been mentioned, discussed and written about all over the web and in almost every endurance sport related podcast.  I (John) have been training with Z2 for the better part of 2013 with tremendous results.  I thought it was worth sharing my experience(s) and how it could help you in your training.

***** Disclaimer: I am not a trained health or fitness professional.  The following is simply my experience with a particular training method. *****

A good place to start is with a definition of Z2 training.  Zone 2 refers to your aerobic heart rate range, and specifically training within that zone.  Typically, endurance athletes use five (5) heart rate zones to identify the level of effort and exertion while training or racing.  You can use a good heart rate zone calculator to find out the upper and lower heart rate limits for each zone.  It is also advisable to recalculate your zones periodically.  Monitor your resting heart rate and then comb through your data for your max effort heart rate (typically from a race).  I would say every 4-6 months would be sufficient.

In order to effectively utilize Z2 training, you must first check your ego at the door and then adjust your perception of a training session.  I used to plan my training by targeting speeds and distances.  "I am going to run 6 miles at an 8 minute/mile pace."  The following week, I would up the mileage a little, and hope to maintain the same pace.  If the pace dropped, I must be having a bad day.  If the pace increased, I must be getting stronger; until I increase the mileage again.

This whole cycle brought me right to the point of mediocrity, also known as a plateau.  I just couldn't go any faster or farther.  The idea of ever running a full marathon was painfully out of reach.  Enter Z2 training.

Check Your Ego At The Door

To get the most out of this system, I realized I needed to be humble.  In the beginning, I averaged 15 minutes/mile on my runs and 15 miles/hour on the bike, much slower than I was "comfortable" with.  Soccer Moms with jogging strollers and teenagers on BMX bikes passed me by on the slightest of inclines.  I had to stop running at that breakneck pace of 15 min/mile to walk for 100 yards.  And when my neighbor was standing in their yard while I shuffled on by, I wanted to bury my head in shame.  Handling the humility of Z2 training was probably the most difficult aspect.  I wanted to bag the whole concept, but thankfully I didn't.

Change Your Perception Of A Training Session

Once I had my ego in check, I had to look at training sessions a little differently.  I was now training by heart rate and time.  Notice, I didn't mention distance or speed.  That's the difference.  I scheduled sessions such as "run for an hour in zone 2" with no regard for distance and/or speed.  I simply had to move my body while keeping my heart rate in the right zone for a specified period of time.

Typically, I will run "out" for 30 minutes and "back" for 30 minutes.  If my heart rate starts to creep toward zone 3, I slow it down a bit to stay in zone 2.  Since I have heart rate alerts on my Garmin device, I set the alert a few beats below the top of zone 2.  This informed me when I was getting close, giving me some time to get my heart rate down before going over the limit.  I still employ this practice today.

My goal was always to get 100% of my training time in zone 2.  Obviously, I spent some in zone 1 as I warmed up and possibly touched zone 3 if I overdid it a little.  Not too much of an issue, because this got better and easier.

Stay Indoors At First

When I started this type of training, I threw away my hatred of the treadmill or bike trainer.  Since it is a much more controlled and static environment, it allowed me to truly hit the target for workouts and trained my body to work more efficiently across larger blocks of time.  A good time of year to really commit to Z2 training is the late fall, going into winter.  Most of my training would be indoors anyway, so I got to make the most of it.

Be Patient

This was not a quick-fix, overnight plan that made me a better endurance athlete in a few weeks.  It took time.  It took a lot of time.  I started to see small benefits in about 3 months.  At about 5 months, I started to see some huge gains.

For example, here is a breakdown of a treadmill run on March 20th:

  • Total Time: 60:00 minutes
  • Zone 1: 03:00 minutes
  • Zone 2: 57:00 minutes
  • Average Pace: 14:22 min/mile
  • Average HR: 124 BPM

A few months later on June 7th (treadmill):
  • Total Time: 90:00 minutes
  • Zone 1: 11:00 minutes
  • Zone 2: 1:19:00 minutes
  • Average Pace: 13:39 min/mile
  • Average HR: 123 BPM

A few weeks ago on August 1st (outside):
  • Total Time: 50:00 minutes
  • Zone 1: 03:00 minutes
  • Zone 2: 47:00 minutes
  • Average Pace: 09:57 min/mile
  • Average HR: 125 BPM


It took 5 months, but I broke a 10 minute mile all in zones 1 and 2.  At this point, I could basically run all day in zone 2, and do it at around a 10 min/mile pace.  That is a huge improvement in my aerobic engine.  I am hoping to be able to run a 3:30:00 marathon by this time next year, all in zone 2.  The progress that I have made thus far, gives me confidence that I can.

Eat More Fat

Another aspect of training that coincides with Z2 training is diet.  When I train in Z2, I am primarily burning fat.  I sparingly trickle small amounts of natural sugar sources when I am training or racing in the higher zones.  By primarily training in Z2 and consuming a lot more fat from healthy sources, my body has become much more metabolically efficient.

I substantially increased my fat intake earlier this year and routinely do 3 and 4 hour training sessions in a fasted state.  I will consume about 150 calories throughout the training session and hydrate with Nuun.  I no longer have a need (or desire) for gels or sugary sports drinks.  Fat as fuel is the way to go.  No bonks, no sugar crashes.

Mix It Up

By no means is this the only training I do.  It is the vast majority of the hours, but I still need to get my body ready to go fast.  I throw in intervals, speed work, hill repeats and strength workouts, but spend most of my time in Z2.  I also found that when I do let the hammer down, I have more horsepower at my disposal.  But I am very careful not to overdo it.  I use Training Effect on my Garmin to limit myself and allow for ample recovery.  You can read more about Training Effect ("TE") here.

This is my HR Zone breakdown for the last 4 months.  Zones 1 and 2
make up over 66% of my total training time.
Avoid Injuries

An added benefit of training the Z2 way is I tend to avoid injuries.  Long gone are the days of pounding my knees and legs into the ground with hours of tempo and threshold efforts.  Training at lower intensities allowed me to focus on form much more often.  I went from a heel-striker to a mid-foot stride in a very short period of time.

I have also incorporated the use of a weight vest during my Z2 runs.  This is a very dangerous practice if not done correctly, so I would not recommend it to newbies or anyone that has not done a ton of research.  I will compose a post on the use of a weight vest in the near future.

I have not had a single injury or even a "niggle" this year, and I can attribute that to extensive Z2 training.

Z2 Versus Maffetone

To the best of my knowledge, and through extensive research, Z2 training and Phil Maffetone's method ("MAF") are essentially the same thing.  They only differ in the zone calculation.  The MAF zone will typically be slightly higher than a Z2.  However, they are both rooted in the same concept of training in your aerobic zone, below the point where your body flips from burning mostly fat to burning mostly carbohydrates.

For most people, Z2 and MAF would be interchangeable with regards to building a solid aerobic base.  I have chosen the Z2 method, but I am sure MAF would have yielded similar results.

Starting Out

When I first started out training with Z2, I had a tremendous difficulty keeping my heart rate in the correct zone.  One little trick that I used was to forget the numbers for a while and train by feel.  I did this by using the way I speak as a gauge.  Before I started a training session (at rest), I would speak my full home address, "123 Main Street, MyTown, New York" in a normal, conversational speed and tone.  I could speak this aloud on one breath when I was at rest.

Once I started the training session, I would periodically recite my address in the same fashion as before.  When I got to a point where I either needed to take a breath mid-sentence, or had to speed it up to get it all out on one breath, I knew I was out of that aerobic zone.  That is when I backed it down a bit to where I could recite it correctly.

Although I would record my heart rate data, it was not the driver of these sessions.  After a few weeks, I could see that data showed improvement.  30% in zone 2, then 35%, then 40% and so on until I was ready to start training BY my heart rate, rather than WITH my heart rate.

What Is The Goal?

Although Z2 training encompasses a large portion of my training volume, I also do a fair amount of hard interval, tempo, threshold and "to failure" training.  With all of these variations, I am able to concurrently build endurance, speed and strength.  So the question is, "what is the goal of Z2 training?"

The main goal of Z2 training is to build a solid aerobic base for endurance activities and events.  The longer the event, the more beneficial Z2 training becomes.  For example, Z2 training has almost no impact on my sprint distance races, a moderate effect on my Olympic distance, a great impact on my 70.3 and will play a HUGE role in my full Ironman next year.

My training goal is to get my Z2 paces to be my expected race paces.  I figure if I can do 75% of each leg in Z2 while achieving my desired race pace, I can drop the hammer for the last 25% and have the horsepower available that others will not.  Effective Z2 training should prevent me from blowing up prior to the finish line.

I have established time goals for Ironman Lake Placid next year.  One of them is to run the marathon segment in 4 hours or less.  That equates to running at a 9:10 pace for 26 miles.  As of this week, I can run at a 9:58 pace for 2+ hours.  With a full year ahead of me, I am very optimistic about meeting or exceeding this goal.  Only time will tell, and I have the time and patience to do it.

Conclusion

For me, a competitive triathlete, Z2 training has been the difference between a "middle-of-the-packer" and the podium.  It is something that anyone can employ with a little discipline and patience.  I have also come to understand that this method is a long-term way of perpetually gaining fitness without the risk of a huge burn out at the end of each season.  It is the perfect method if you are just starting out, have hit a plateau or just want to go longer.

Please follow us, as I will be updating my progress throughout the year.

Connect with me on Twitter.

Tuesday, July 30, 2013

Iron Family Tri Tech #001-Training Effect

I (John) have been training for endurance sports/activities for almost 10 years now.  I started out as a cyclist and made the leap to triathlon in 2011.  Over the years, I have done a ton of things wrong (and a few things correctly) pertaining to training, racing and nutrition.

From these successes and failures, I have been able to formulate a solid plan and strategy for my triathlon participation.  This will be the first of many posts specifically addressing what has worked and not worked for me on my journey.  So here we go:

Training Effect ("TE")

Recently, a local triathlete posted a picture of his Garmin 910XT screen after a training run, on a Facebook forum that I am active in.  Kudos to him for a successful run under difficult conditions.  In evaluating the photo of his workout summary screen, I took notice of his Training Effect ("TE") value.  I posted a comment asking him if he was familiar with that value, what it means and how to use it.  Although he was familiar with TE, he was unaware of the effects of a 4.7 TE value obtained from that workout.  Others in the group were also curious about TE, so I gave a brief summary as to what it is.  I am going to elaborate more on that explanation and how I use it in this post.

If you have a Garmin 910XT or a Suunto device, you have TE built in.  Most people do not know they have an extremely powerful training tool in their toolbox, even fewer know how to use it effectively.  TE is an algorithmic calculation developed by FirstBeat that uses the device's existing heart rate data to "accumulate" the cardiovascular and adrenal system effects of a particular workout or set of workouts.

Heart Rate ("HR") data is vitally important for effective endurance sport training.  However, there is one big inherent flaw.  HR is just an instantaneous snap shot of your exertion level.  We look at our watch on a recovery or aerobic workout and see a HR of 120.  That's good, we are not working very hard.  But, what about 10 minutes ago?  What about that hill we had to power up?  I still have X miles to go to get home, how hard should I work?  TE answers these questions.

Most athletes, when evaluating their workouts, look very closely at the average HR number.  This is useful, but does not tell the whole story.  Let's say you did a 90 minute run where you sprinted for the first 15 minutes, holding your HR at 180 BPM.  The rest of the workout, you did at a steady 120 BPM.  Doing the math (weighted average), you would have an average HR of 130 BPM.  This would appear to be a good recovery/aerobic workout based on the 130 average.  But, that 15 minutes at max effort just trashed your body.  It put huge stresses on all your systems, and without proper recovery, will adversely effect subsequent workouts.

Here is how TE is a much more effective training tool.  TE is a cumulative value that starts at 1.0 and goes as high as 5.0.  The accumulation of "points" is not linear, so getting from 1.0 to 2.0 takes less effort than going from 2.0 to 3.0.  In fact, if I am doing a run off the bike, the run TE value shoots to the 1.7 range in the first half mile or so.  As you stress your body, the value goes up.  One thing to keep in mind is that since it is cumulative, the value can NEVER go down.  If you overdo it, you overdid it and can't un-ring that bell!  This is why TE is much more effective than HR alone.  Decreasing your effort will stabilize the TE value, but if you don't back off enough, you could push it up further if the length of the workout is long.

The easiest way to start using TE is to set one of your data screens to TE, HR ZONE and TIME.  Make the TE window the largest because this value is what drives your training session.

On a side note, I have contacted Garmin and suggested that they allow TE value to be an "Alert" option on the 910XT.  This would allow us to set a value, do our thing and get feedback from the device when we have hit our goal.  I will keep you posted as to how they respond.

Since I started training with TE, I established a baseline recovery time for each value.  This is what I use, but you may want to vary it based on your fitness level and experience:


  • 2.0 = Twelve (12) hours of recovery.  Do a 2.0 effort in the morning and you can hit another discipline in the evening.  Most of your training volume each week should be done in this range.
  • 3.0 = Twenty-Four (24) hours of recovery.  I usually do these in the mornings when I do not have an evening workout planned.  I also try not to make both legs of a brick session 3.0 efforts.  Bike to 2.0 and then run to 3.0 or vice-versa.  About 2-3 sessions at this effort has worked well for me.
  • 4.0 = Thirty-Six (36) hours of recovery.  Harder or longer intervals that are near race-pace efforts.  I usually try to keep these to a maximum of one (1) per week, maybe even one (1) every other week.
  • 5.0 = Forty-Eight (48) hours of recovery, minimum!  I have only hit 5.0's in races.  This is reserved for all-out efforts in race conditions.  Simply stated, if you hit a 5.0 and you do not have a timing chip around your ankle, you waaaaaay over did it!  Take some time off.  You will be thankful later on.


Obviously, this is just a suggested baseline.  If I did a 4.0 workout, I have, 24 hours later, followed it up with a very easy (1.5 or less) trainer spin or a very easy swim effort.  Easy swims where you focus on form are a great way to get in some time when you are technically supposed to be recovering.  Just keep the effort low and the HR down.

I usually do workouts that would be described as "less than 2.0" or "build to 3.0."  Once you hit your number, back the effort down to Zone 2, or stop the workout all together.  Remember, you cannot undo over-training!

This is a graph of one of my "less than 2.0" runs.  Notice the varied pace to stabilize my HR.  Also notice the slow pace (10:59 min/mile average).  When using TE, don't worry about pace and speed.  That will come all by itself with effective training.  Just for reference, that same run, on the same course only 5 months ago was completed at a 14:37 min/mile average pace.  Next year, this easy run may be at my current race pace!

See the complete data set for this run here.

HR is in Red, Pace in Blue, Cadence in Yellow.  My Zone 2 for runs is 118-133 BPM.  This run's average HR was 126.

Below is a graph of my "build to 3.0" bike trainer workout from earlier this week.  I did about 30 minutes in Zone 2 then dropped the hammer.  As soon as TE hit 3.0, I backed it down to an easy effort to finish out the workout.  Notice the very sharp HR drop after I let off the gas.  This comes from tons of TE 2.0 workouts.  I can recover from over-exertions very easily.  This comes in handy during a race when you go off your race plan or have to go harder than you wanted to on hills or to chase down a rival.

See the complete data set for this bike trainer session here.


I hope this post helped identify why using TE is valuable and why you should pay attention to this feature if you have it.  You can find more info about TE here.  Also, feel free comment and ask questions if you have them.

Don't Forget to Follow Us on Bloglovin!!

Follow me and my Iron Family: